This add-on allows you to log in to your Home Assistant instance using SSH or a Web Terminal, giving you to access your folders and also includes a command-line tool to do things like restart, update, and check your instance. This is an enhanced version of the provided SSH add-on by Home Assistant and focusses on security, usability, flexibility and also provides access using a web interface.

While this add-on is created and maintained with care and with security in mind, in the wrong or inexperienced hands, it could damage your system. Additionally, it comes out of the box with the following:. The installation of this add-on is pretty straightforward and not different in comparison to installing any other Home Assistant add-on.

Note : Remember to restart the add-on when the configuration is changed. Note : This is just an example, don't copy and paste it! Create your own! Possible values are:. Please note that each level automatically includes log messages from a more severe level, e. Using trace or debug log levels puts the SSH and Terminal daemons into debug mode.

While SSH is running in debug mode, it will be only able to accept one single connection at the time. The following options are for the option group: ssh. These settings only apply to the SSH daemon. This option allows you to change to username the use when you log in via SSH. It is only utilized for the authentication; you will be the root user after you have authenticated. Using root as the username is possible, but not recommended. Note : Due to limitations, you will need to set this option to root in order to be able to enable the SFTP capabilities.

Sets the password to log in with. Leaving it empty would disable the possibility to authenticate with a password. We would highly recommend not to use this option from a security point of view. If it is listed, the add-on will not start. Add one or more public keys to your SSH server to use with authentication.

This is the recommended over setting a password. Please only enable it when you plan on using it. Note : Due to limitations, you will need to set the username to root in order to be able to enable the SFTP capabilities.By using our site, you acknowledge that you have read and understand our Cookie PolicyPrivacy Policyand our Terms of Service. Ask Ubuntu is a question and answer site for Ubuntu users and developers. It only takes a minute to sign up.

Lately some really bad things have been happening with my computer, having to do with lack of icons and all kinds of bad things going with my graphical interface. All the bad things in the appeal are accompanied by a certain disability of my terminal.

hassio update command line

I'm using I get sudo: apt-get: command not found message. And it is the way it goes with all my apt-get commands. What can it mean? How to fix this, especially concerning all the other problems I'm experiencing? The long version would be a waste of your time: your system will never be clean, but if you insist you could try:. I would definitely go for a fresh new install as there are so many things to do and so little time. I faced the same issue regarding apt-get: command not found here are the steps how I resolved it on Ubuntu Xenial.

I was facing the same issue. Ubuntu Community Ask! Sign up to join this community. The best answers are voted up and rise to the top. Home Questions Tags Users Unanswered. Terminal: sudo: apt-get: command not found Ask Question. Asked 5 years, 9 months ago. Active 5 months ago.This page describes the console based raspi-config application. If you are using the Raspberry Pi desktop then you can use the graphical Raspberry Pi Configuration application from the Preferences menu to configure your Raspberry Pi.

It targets Raspbian. You will be shown raspi-config on first booting into Raspbian. To open the configuration tool after this, simply run the following from the command line:. The sudo is required because you will be changing files that you do not own as the pi user. Use the up and down arrow keys to move the highlighted selection between the options available.

Pressing left will take you back to the options. Alternatively, you can use the Tab key to switch between these. Note that in long lists of option values like the list of timezone citiesyou can also type a letter to skip to that section of the list.

Subscribe to RSS

For example, entering L will skip you to Lisbon, just two options away from London, to save you scrolling all the way through the alphabet. Generally speaking, raspi-config aims to provide the functionality to make the most common configuration changes. Some options require a reboot to take effect. The default user on Raspbian is pi with the password raspberry. You can change that here.

Read about other users. From here you can change what happens when your Pi boots. Use this option to change your boot preference to command line or desktop. You can choose whether boot-up waits for the network to be available, and whether the Plymouth splash screen is displayed at boot-up.

hassio update command line

The localisation submenu gives you these options to choose from: keyboard layout, time zone, locale, and WiFi country code.

All options on these menus default to British or GB until you change them. Select your local time zone, starting with the region, e. Europe, then selecting a city, e. Type a letter to skip down the list to that point in the alphabet. This option opens another menu which allows you to select your keyboard layout. It will take a long time to display while it reads all the keyboard types.

Changes usually take effect immediately, but may require a reboot. SSH allows you to remotely access the command line of the Raspberry Pi from another computer. SSH is disabled by default. If connecting your Pi directly to a public network, you should not enable SSH unless you have set up secure passwords for all users. This is usually used for DS18B20 temperature sensors. The default is MHz but it can be set up to MHz. The overclocking you can achieve will vary; overclocking too high may result in instability.

Selecting this option shows the following warning:.Note : This is still in alpha and under heavy development. Name and structure of commands are expected to still change. If you do not have a Python setup you can try use hass-cli via a container using Docker. To make auto-completion and access environment work like other scripts you'll need to create a script file to execute. Now put the hass-cli script into your path and you can use it like if you had installed it via command line as long as you don't need file system access like for hass-cli template.

To get started you'll need to have or generate a long lasting token format on your Home Assistant profile page i. Once that is enabled and you are using either zsh or bash run the following to enable autocompletion for hass-cli commands.

Note: Below is listed some of the features, make sure to use --help and autocompletion to learn more of the features as they become available. For example to get basic info about your Home Assistant server you use info :.

Finally, you can also via --columns control which data you want shown. Each column has a name and a jsonpath. The default setup for entities are:. You can get more details about a state by using yaml or json output format.

In this example we use the shorthand of output: -o :. This will open the current state in your favorite editor and any changes you save will be used for an update. You can get history about one or more entities, here getting state changes for the last 50 minutes:. The data is sorted by default as Home Assistant returns it, thus for history it is useful to sort by a property:. The advantage for this is that it can be used for sorting on any property even if not included in the default output.

Since v0. You can assign area to a specific device. Here the Kitchen area gets assigned to device named "Cupboard Light".

hassio update command line

Above will assign area named "Kitchen" to all devices having substring "Kitchen Light" and to specific area with id "eab This will watch for all event types, you can limit to a specific event type by specifying it as an argument:. If you do it from your. Note: For this to work you'll need to have setup the following environment variables if your home-assistant is secured and not running on localhost Allow to connect to servers with self-signed certificates.

Be careful! Commands: area Get info and operate on areas from Home AssistantBy using our site, you acknowledge that you have read and understand our Cookie PolicyPrivacy Policyand our Terms of Service.

The dark mode beta is finally here. Change your preferences any time. Stack Overflow for Teams is a private, secure spot for you and your coworkers to find and share information.

I'm able to update pip-managed packages, but how do I update pip itself? According to pip --versionI currently have pip 1. What's the command for that?

Automation Editor Tool - Home Assistant Tutorial

Do I need to use distribute or is there a native pip or virtualenv command? I've already tried pip update and pip update pip with no success. On Windows the recommended command is:. The more safe method is to run pip though a python module :. On windows there seem to be a problem with binaries that try to replace themselves, this method works around that limitation. I tried all of these solutions mentioned above under Debian Jessie. They don't work, because it just takes the latest version compile by the debian package manager which is 1.

Some packages that use pip as prerequisites will not work as a results, such as spaCy which needs the option --no-cache-dir to function correctly.

So the actual best way to solve these problems is to run get-pip. This will install the current version which at the time of writing this solution is 9. From there now I ran the command In case you are using venv any update to pip install will result in upgrading the system pip instead of the venv pip. You need to upgrade the pip bootstrapping packages as well. Then entered the "python -m install --upgrade pip" all good!

Single Line Python Program The best way I have found is to write a single line program that downloads and runs the official get-pip script. See below for the code.

hassio update command line

The official docs recommend using curl to download the get-pip script, but since I work on windows and don't have curl installed I prefer using python itself to download and run the script. This line gets the official "get-pip. Precautions It's worth noting that running any python script blindly is inherently dangerous. For this reason, the official instructions recommend downloading the script and inspecting it before running. That said, many people don't actually inspect the code and just run it.

This one-line program makes that easier. The problem was that http requires SSL and so I needed to force it to use https to get around this requirement. Very Simple.GitHub is home to over 40 million developers working together to host and review code, manage projects, and build software together. If nothing happens, download GitHub Desktop and try again. If nothing happens, download Xcode and try again.

Install Home Assistant Hass.io as VM in VMware Workstation

If nothing happens, download the GitHub extension for Visual Studio and try again. The Home Assistant Command-line interface hass-cli allows one to work with a local or a remote Home Assistant Core instance directly from the command-line. Note : This is still in alpha and under heavy development. Name and structure of commands are expected to still change.

If you do not have a Python setup you can try use hass-cli via a container using Docker. To make auto-completion and access environment work like other scripts you'll need to create a script file to execute. Now put the hass-cli script into your path and you can use it like if you had installed it via command line as long as you don't need file system access like for hass-cli template.

To get started you'll need to have or generate a long lasting token format on your Home Assistant profile page i. Once that is enabled and you are using either zsh or bash run the following to enable autocompletion for hass-cli commands. Note: Below is listed some of the features, make sure to use --help and autocompletion to learn more of the features as they become available.

For example to get basic info about your Home Assistant server you use info :. Finally, you can also via --columns control which data you want shown. Each column has a name and a jsonpath.

The default setup for entities are:. You can get more details about a state by using yaml or json output format. In this example we use the shorthand of output: -o :. This will open the current state in your favorite editor and any changes you save will be used for an update. You can get history about one or more entities, here getting state changes for the last 50 minutes:.

homeassistant-cli 0.8.0

The data is sorted by default as Home Assistant returns it, thus for history it is useful to sort by a property:. The advantage for this is that it can be used for sorting on any property even if not included in the default output. Since v0. You can assign area to a specific device. Here the Kitchen area gets assigned to device named "Cupboard Light". Above will assign area named "Kitchen" to all devices having substring "Kitchen Light" and to specific area with id "eab This will watch for all event types, you can limit to a specific event type by specifying it as an argument:.

If you do it from your. Note: For this to work you'll need to have setup the following environment variables if your home-assistant is secured and not running on localhost Recommended way to develop is to use virtual environment to ensure isolation from rest of your system using the following steps:.

Skip to content. Dismiss Join GitHub today GitHub is home to over 40 million developers working together to host and review code, manage projects, and build software together.Hi, I've installed Hass. Somebody knows how can I fix that? Thanks for the work here!

I have the docker running on Ubuntu but cannot figure out how to connect to it with the browser. I have tried hassio. Usually I copy and paste a docker-compose yaml file. I have the Synology version of docker running on the Synology Nas. Jan 03 MediaServer systemd[1]: Started Hass. PS: my Environment is a running and hopefully actual Ubuntu Please ask for any other needed and missing Information.

Then use. It seems like you have a permissions issue. Apparently the script isn't run completely as sudo when you use curl. Sidenote: When you first download the script, the permissions may be set to only read check by running "ls -lah". KasperNS Thank you for your quick reply, but it doesn't makes a difference. It would be great to have this change also in the install script. Or is there any point against that fix? I'm running these commands via the ubuntu windows app on windows I have a full featured home assistant already setup this way.

Great stuff, thanks. How can I ensure that the Hass. Go to Hass-io dashboard - add-ons and update from there, you should have a card with an update and release notes. How do you increase the amount of disk that the docker image uses? Docker logs show the following error:. Had a problem with my Ubuntu server and had to reinstall everything. Using the same method you have listed here I was able to get hassio installed, however, this time around that last part is giving me an error regardless if I type it in or copy and paste, the error starts with install supervisor Docker container then invalid reference format.

Hello frenckThanks for the script, is great. The only thing I am missing is how to change the hassio container docker run command. I'd like to add the --device argument so I can access USB port and enable z-wave.

How can I do that? I have looked inside the services code, but as far as I can see, they only start the supervisor container. Hello frenck. Hi frenck. The urls jossie67 pointed out have been fixed now.